MPP tillhandahåller en rad pejl- och nivåmätningsprodukter för dig som är intresserad av uppkopplade tankar. När du kopplar upp dina tankar eller cisterner kan du få bättre översikt över dem, och deras bränslenivåer. Genom fjärravläsning kan du enkelt ha koll på dem från din dator och/eller telefon, och du kan även få notifikationer om när du behöver fylla på i tankarna. Därmed minskar behovet av onödiga bränsletransporter och tidskrävande, fysiska nivåmätningar på plats, så att du kan lägga tiden och pengarna på annat.
Intresset för uppkopplade tankar ökar kontinuerligt, och vi på MPP tror att det är en utveckling som vi bara är i början av. När du köper tankar och cisterner från oss kan vi se till att leverera dem till dig uppkopplade och klara, och vi kan även installera pejl- och mätutrustning på dina befintliga tankar. Kontakta oss gärna, så berättar vi mer om hur vi kan hjälpa dig!
VISY-Stick measures fuel level, temperature and also the water level if water is at the bottom of the tank. All with millimeter precision up to 9,000 millimeters. The measurement method – magnetostrictive level measurement – is thus very reliable and accurate. VISY-Stick is made of stainless steel, can handle all types of fuel and is usually mounted in a 1½ ”socket. The sensor has an M12 connector and can also be installed in very harsh environments (in tanks below and above ground) without being affected by the climate.
VISY-Stick level sensors are available in lengths of 1700, 1900, 2300, and 2800 millimeters.
SiteEasy is prepared to connect our series of Transport tanks with rochester level gauges. The package will be completely complete and ready to be connected to the cloud. You simply replace the analog top gauge on the tank’s level gauge to mount the SiteEasy sensor there instead. Turn on the power and log into SiteInfo and the tank is online.
SiteEasy is battery powered and only requires cellular coverage. The modem is easily connected to SiteInfo where you can follow the level in your tank wherever you are. Mount the pressure sensor, switch on the power and log in to SiteInfo where you can see the level in your tank anytime and anywhere.
With the SiteEasy GPS version, you not only get to know the level of the tank, but also where it is located. Current position is detected and registered in SiteInfo every time the level data is communicated.
Displays with +/- 1.0% accuracy. Withstands outdoor environment and rated to IP65. The sensor is suitable for ATEX Zone 0/1 and the meter unit is suitable for the Zone 2 area. The graph is displayed in both liters and percent. High and low level points are displayed. 4-20 milliampere output. Calibrated for cubic, cylindrical and horizontal tanks via the display. Comes with sensor and a 1-inch tank connection with cable clamp.
Displays with +/- 1.0% accuracy. Withstands outdoor environment and rated to IP65. The graph is displayed in both liters and percent. High and low level points are displayed. 4-20 milliampere output. Calibrated for cubic, cylindrical and horizontal tanks via the display. Comes with sensor and a 1-inch tank connection with cable clamp.
SiteInfo is a cloud-based level monitoring service that makes your logistics simpler and more cost-effective. Via any computer, tablet or mobile phone, regardless of the time, you can read a lot of information regarding your tanks. Without the need for on-site staff, you will immediately find out about current volumes. You avoid empty cisterns, unnecessary deliveries and costly returns.
For systems with several tanks or tanks, SiteMonitor fits perfectly with its connections for 1-8 sensors 4-20 mA, 1-4 sensors 0-10V and RS232 / RS485. The measuring range can be configured via SiteInfo. SiteMonitor can also be connected to all level systems on the market. It supports i.a. float sensors, pressure transmitters, ultrasound, line radar, magnetostrictive sensors and ATM systems such as FAFNIR, OPW and Gilbarco Veeder-Root. If you have an existing measurement system, we can certainly connect it to SiteInfo. This way you do not have to invest in a new measurement system.
Oil and chemistry resistant cable with built-in air conductor to compensate for atmospheric pressure variations. Stocked in variants of 1-10 mVp. The pressure level sensor is delivered with PUR cable – for level measurement of liquids that are not pressurized or EX-rated – alternatively with Teflon cable and EPDM gasket to cope with tougher environments such as. AdBlue and chemical products. The sensor is also available as an order item with pressure and temperature measurement (both signals are 4-20mA).
